How Can We Help?
< All Topics
Print

APS-30 / 31- □ T replacement

Question

Question

APS-30-4T (APS-30-2T, APS-31-4T, APS-31-7T) has failed.
I heard that it has already been abolished, but is it possible to replace the current APS-30-4N (APS-30-2N, APS-31-7N)?
If not, what would be the alternative?

Reply

Reply

APS- □-□ T series is a DC voltage output type.
This type is DC12V level positive logic operation and has no current switching capability.
On the other hand, APS- □-□ N has the same shape, but the output format is NPN open collector output and the specifications are different, so it cannot be replaced.
Although it is not a fully compatible product, APS □-□ GK-E2 with PNP open collector output may be used.
If the input resistance of the input device is large, the input may remain ON even if the sensor is OFF.
The alternative candidate APS5-12GK-E2 has a working distance of 5 mm, an outer diameter of M12 resin cylinder shape,
APS10-18GK-E2 has an operating distance of 10 mm and an outer diameter of M18 resin cylinder.
Since the case shape and operating distance are different, please check the mounting condition.

Previous APS-14-15N exchange
Next APS4-12S mounting hole dimensions
Table of Contents